This bracket utilizes new technology which eliminates the traditional 5/8″ docking bolt. Please contact your sales representative for more information. Q’Straint recommends this bracket be used for the driver and front passenger positions in most vehicles. This bracket is also … More Info

Forward entry) Not to be equipped with the high back comfort seat. Wheelchair discontinued by manufacturer.

Tubing size may vary –  Please verify all measurements (See “Wheelchair Measurement Guide” at top). Standard Tubing is 1″ and Frame Rail +6″ NOTE:  For wheelchairs with a ground clearance 6″ or greater, please consider using The QLK 150 with … More Info

Please verify all measurements (See “Wheelchair Measurement Guide” at top). NOTE: For wheelchairs with a ground clearance 6″ or greater, please consider using The QLK 150, with a Base Mount Kit of 2.5″ or more

Please verify all measurements (See “Wheelchair Measurement Guide” at top). Standard Tubing is 1″ and Frame Rail +6″ NOTE:  For wheelchairs with a ground clearance 6″ or greater, please consider using The QLK 150 with a Base Mount Kit of … More Info

NOTE: Wheelchair must have camber tube and cross tube, and tube diameter must be between 0.875″ to 1.37″. Distance from cross tube to camber tube must be between 4.5″ to 11.25″ to use this bracket. If your chair has a … More Info

Introducing the new lightweight rigid sport chair bracket. This bracket is 50% lighter than our traditional sports chair bracket application. NOTE: Wheelchair must have camber tube and seat cross tube. Seat cross tube diameter must be between 0.7″ to 1.125″. … More Info

NOTE: Wheelchair must have camber tube and cross tube, and tube diameter must be between 0.875″ to 1.37″. Distance from cross tube to camber tube must be between 4.5″ to 11.25″ to use this bracket. If your chair has a … More Info

Introducing the new lightweight rigid sport chair bracket. This bracket is 50% lighter than our traditional sports chair bracket application. NOTE: Wheelchair must have camber tube and seat cross tube. Seat cross tube diameter must be between 0.7″ to 1.125″. … More Info

NOTE: Wheelchair must have camber tube and cross tube, and tube diameter must be between 0.875″ to 1.37″. Distance from cross tube to camber tube must be between 4.5″ to 11.25″ to use this bracket. If your chair has a … More Info

Introducing the new lightweight rigid sport chair bracket. This bracket is 50% lighter than our traditional sports chair bracket application. NOTE: Wheelchair must have camber tube and seat cross tube. Seat cross tube diameter must be between 0.7″ to 1.125″. … More Info

NOTE: Wheelchair must have camber tube and cross tube, and tube diameter must be between 0.875″ to 1.37″. Distance from cross tube to camber tube must be between 4.5″ to 11.25″ to use this bracket. If your chair has a … More Info

Introducing the new lightweight rigid sport chair bracket. This bracket is 50% lighter than our traditional sports chair bracket application. NOTE: Wheelchair must have camber tube and seat cross tube. Seat cross tube diameter must be between 0.7″ to 1.125″. … More Info

Please verify all measurements (See “Wheelchair Measurement Guide” at top). Standard Tubing is 1″ and Frame Rail +6″ NOTE:  For wheelchairs with a ground clearance 6″ or greater, please consider using The QLK 150 with a Base Mount Kit of … More Info

Please verify all measurements (See “Wheelchair Measurement Guide” at top). Confirm Height on Breezy 600, some options may have -6″ Frame. Wheelchair discontinued by manufacturer.

(Forward entry) Not to be equipped with the high back comfort seat. Wheelchair discontinued by manufacturer.

(Forward entry) Not to be equipped with the high back comfort seat. Wheelchair discontinued by manufacturer.

Please verify all measurements (See “Wheelchair Measurement Guide” at top). Standard Tubing is 1″ and Frame Rail +6″. SINGLE FOOTREST:  NOTE:  For wheelchairs with a ground clearance 6″ or greater, please consider using The QLK 150 with a Base Mount … More Info

LOW BACKREST – Is below shoulder blades. Wheelchair discontinued by manufacturer.

Wheelchair discontinued by manufacturer.

LOW BACKREST – Is below shoulder blades. Wheelchair discontinued by manufacturer.

Lightweight Aluminum. No lower frame to attach bracket. Wheelchair discontinued by manufacturer.

Chair discontinued by manufacturer. Chairs that contain a vent tray are not supported.

Chairs that contain a vent tray are not supported.

Please verify all measurements (See “Wheelchair Measurement Guide” at top). Installing bracket will keep the chair rigid and no longer allow it to fold. NOTE:  For wheelchairs with a ground clearance 6″ or greater, please consider using The QLK 150 … More Info

Please verify all measurements (See “Wheelchair Measurement Guide” at top). NOTE: For wheelchairs with a ground clearance 6″ or greater, please consider using The QLK 150, with a Base Mount Kit of 2.5″ or more

Measure gearboxes outside to outside. (15 1/4″, 16 1/4″, 17 1/4″, 18 1/4″, 19 1/4″, 20 1/4″)

Power Configuration. Wheelchair discontinued by manufacturer.

Power Configuration. Wheelchair discontinued by manufacturer.

NOTE: For models with a forward mounted seat actuator, bracket modification may be required.Power Configuration.

NOTE: For models with a forward mounted seat actuator, bracket modification may be required.Power Configuration.

NOTE: For models with a forward mounted seat actuator, bracket modification may be required.

Chair discontinued by manufacturer.

Wheelchair discontinued by manufacturer.

NOTE: Wheelchair must have camber tube and cross tube, and tube diameter must be between 0.875″ to 1.37″. Distance from cross tube to camber tube must be between 4.5″ to 11.25″ to use this bracket. If your chair has a … More Info

Introducing the new lightweight rigid sport chair bracket. This bracket is 50% lighter than our traditional sports chair bracket application. NOTE: Wheelchair must have camber tube and seat cross tube. Seat cross tube diameter must be between 0.7″ to 1.125″. … More Info

NOTE: Wheelchair must have camber tube and cross tube, and tube diameter must be between 0.875″ to 1.37″. Distance from cross tube to camber tube must be between 4.5″ to 11.25″ to use this bracket. If your chair has a … More Info

Introducing the new lightweight rigid sport chair bracket. This bracket is 50% lighter than our traditional sports chair bracket application. NOTE: Wheelchair must have camber tube and seat cross tube. Seat cross tube diameter must be between 0.7″ to 1.125″. … More Info

NOTE: Wheelchair must have camber tube and cross tube, and tube diameter must be between 0.875″ to 1.37″. Distance from cross tube to camber tube must be between 4.5″ to 11.25″ to use this bracket. If your chair has a … More Info

Introducing the new lightweight rigid sport chair bracket. This bracket is 50% lighter than our traditional sports chair bracket application. NOTE: Wheelchair must have camber tube and seat cross tube. Seat cross tube diameter must be between 0.7″ to 1.125″. … More Info

NOTE: Wheelchair must have camber tube and cross tube, and tube diameter must be between 0.875″ to 1.37″. Distance from cross tube to camber tube must be between 4.5″ to 11.25″ to use this bracket. If your chair has a … More Info

Introducing the new lightweight rigid sport chair bracket. This bracket is 50% lighter than our traditional sports chair bracket application. NOTE: Wheelchair must have camber tube and seat cross tube. Seat cross tube diameter must be between 0.7″ to 1.125″. … More Info

Please verify all measurements (See “Wheelchair Measurement Guide” at top). NOTE: For wheelchairs with a ground clearance 6″ or greater, please consider using The QLK 150, with a Base Mount Kit of 2.5″ or more

LOW BACKREST – Is below shoulder blades. Wheelchair discontinued by manufacturer.

Please verify all measurements (See “Wheelchair Measurement Guide” at top). Standard Tubing is 1″ and Frame Rail +6″ NOTE:  For wheelchairs with a ground clearance 6″ or greater, please consider using The QLK 150 with a Base Mount Kit of … More Info

Wheelchair discontinued by manufacturer.

Forward entry suggested. Wheelchair discontinued by manufacturer.

Wheelchair discontinued by manufacturer.

Not to be equipped with elevating seat. Wheelchair discontinued by manufacturer.

Not to be equipped with elevating seat.

Not to be equipped with elevating seat.

Not to be equipped with elevating seat.

Low Ground Clearance – Some configurations may require the use of the QLK-150