Low Ground Clearance – Must use QLK-150 with 1.5″ Base Mounts (#QS99020, now included with the bracket). Please note: Bracket 104 has been tested up to a slope of 9 degrees of incline. Manufacturers maximum rated slope is 6 degrees … More Info

May use power elevating seat

May use power elevating seat

May use power elevating seat

May use power elevating seat

May use power elevating seat

Please measure wheelchair clearance. Ground clearance varies between 2.25″ – 3″ depending on factory options and settings (ie: attendant driver controls, actuating seats, wheels, etc…). We also recommend use of QLK-150 for additional clearance.  May use power elevating seat

The Jazzy 1107 power base disassembles into six parts for easy transportation and storage and is not approved for use with Q’straint’s docking systems.

Folding frame.  This wheelchair will not work with the QLK system.

May use power elevating seat

May use power elevating seat.

May use power elevating seat.

May use power elevating seat.

May use power elevating seat.

May use power elevating seat.

May use power elevating seat.

May use power elevating seat.

May use power elevating seat.

Please measure wheelchair clearance. Ground clearance varies between 2.25″ – 3″ depending on factory options and settings (ie: attendant driver controls, actuating seats, wheels, etc…). We also recommend use of QLK-150 for additional clearance.   May use power elevating seat

Please measure wheelchair clearance. Ground clearance varies between 2.25″ – 3″ depending on factory options and settings (ie: attendant driver controls, actuating seats, wheels, etc…). We also recommend use of QLK-150 for additional clearance.   May use power elevating seat

May use power elevating seat.

Please measure wheelchair clearance. Ground clearance varies between 2.25″ – 3″ depending on factory options and settings (ie: attendant driver controls, actuating seats, wheels, etc…). We also recommend use of QLK-150 for additional clearance.  May use power elevating seat

ⓘ
The Jazzy Air Wheelchair Bracket is ONLY for Forward Entry Applications. Suspension adjustment may be necessary to clear certain thresholds and higher incline ramps.

Advanced Stabilizer ready! Order Part number QS99027.

Advanced Stabilizer ready! Order Part number QS99027.

Ground Clearance of 1.75″, we require 3″

Please measure wheelchair clearance. Ground clearance varies between 2.25″ – 3″ depending on factory options and settings (ie: attendant driver controls, actuating seats, wheels, etc…). We also recommend use of QLK-150 for additional clearance. 

NOTE: The Jet 10 has a ground clearance of less than 3 inches.  The QLK 150 with 1.5″ base mounts must be used for this application.

NOTE: The Jet  10 Ultra has a ground clearance of less than 3 inches.  The QLK 150 with 1.5″ base mounts must be used for this application.

NOTE: The Jazzy Jet 2  has a ground clearance of less than 3 inches.  The QLK 150 with 1.5″ base mounts must be used for this application.

NOTE: The Jet 2  has a ground clearance of less than 3 inches.  The QLK 150 with 1.5″ base mounts must be used for this application.

NOTE: The Jet 3 Ultra  has a ground clearance of less than 3 inches.  The QLK 150 with 1.5″ base mounts must be used for this application.

Low Ground Clearance – Must use QLK-150 with 1.5″ Base Mounts (#QS99020). Clearance under docking pin will be greater than 1″. This Kit features our QLK-150 Advanced Stabilizer. Forward entry recommended

Low Ground Clearance – Must use QLK-150 with 1.5″ Base Mounts (#QS99020). Clearance under docking pin will be greater than 1″. This Kit features our QLK-150 Advanced Stabilizer. Forward entry recommended

Low Ground Clearance – Must use QLK-150 with 1.5″ Base Mounts (#QS99020). Clearance under docking pin will be greater than 1″. This Kit features our QLK-150 Advanced Stabilizer. Forward entry recommended

Ground Clearance of 2.5″, we require 3″

Low Ground Clearance – Must use QLK-150 with 1.5″ Base Mounts (#QS99020). Clearance under docking pin will be greater than 1″.

Low Ground Clearance – Must use QLK-150 with 1.5″ Base Mounts (#QS99020). Clearance under docking pin will be greater than 1

Indoor wheelchair not intended to be used as a seat in a moving vehicle.

Low Ground Clearance – Must use QLK-150 with 1.5″ Base Mounts (#QS99020). Clearance under docking pin will be greater than 1″. This Kit features our QLK-150 Advanced Stabilizer. Forward entry recommended

Ground Clearance of 1.75″, we require 3″

Low Ground Clearance – Must use QLK-150 with 1.5″ Base Mounts (QS99020). Clearance under docking pin will be greater than 1

Please measure wheelchair clearance. Ground clearance varies between 2.25″ – 3″ depending on factory options and settings (ie: attendant driver controls, actuating seats, wheels, etc…). We also recommend use of QLK-150 for additional clearance.  May use power elevating seat

May use power elevating seat

NOTE: For additional ground clearance Q’straint strongly recommends using QLK-150 with optional 2.5″ base mount Kit (QS99022).

May use power elevating seat. 

May use power elevating seat.

May use power elevating seat. 

WC-19 compliant wheelchair. For WC-19 applications please use QLK-150 only. 

WC-19 compliant wheelchair. For WC-19 applications please use QLK-150 only.  

Please verify all measurements (See “Wheelchair Measurement Guide” at top). NOTE: For wheelchairs with a ground clearance 6″ or greater, please consider using The QLK 150, with a Base Mount Kit of 2.5″ or more

Please verify all measurements (See “Wheelchair Measurement Guide” at top).

Please verify all measurements (See “Wheelchair Measurement Guide” at top). NOTE: For wheelchairs with a ground clearance 6″ or greater, please consider using The QLK 150, with a Base Mount Kit of 2.5″ or more

Please verify all measurements (See “Wheelchair Measurement Guide” at top).

The Jazzy 1107 power base disassembles into six parts for easy transportation and storage and is not approved for use with Q’straint’s docking systems.

May use power elevating seat. May have HD Package.