Showing 1–80 of 244 results

  • Invacare Storm Aviva RX

    **NARROWFRM option on order form**

    Narrow base 22.4″ (uses 2 M50 Batteries)

    BRACKET: Non-Approved

  • Invacare Storm Aviva RX

    **STDFRM option on order form**

    Standard base 24.8″ (uses 2 Group 24 Batteries)

    BRACKET: Non-Approved

  • Motion Composites Apex A

    NOTE: Wheelchair must have camber tube and cross tube, and tube diameter must be between 0.875″ to 1.37″. Distance from cross tube to camber tube must be between 4.5″ to 11.25″ to use this bracket. If your chair has a … More Info

    BRACKET: Q04BR101

  • Motion Composites Apex A

    NOTE: Wheelchair must have camber tube and cross tube, and tube diameter must be between 0.875″ to 1.37″. Distance from cross tube to camber tube must be between 4.5″ to 11.25″ to use this bracket. If your chair has a … More Info

    BRACKET: Q04BR102

  • Motion Composites Apex C

    NOTE: Wheelchair must have camber tube and cross tube, and tube diameter must be between 0.875″ to 1.37″. Distance from cross tube to camber tube must be between 4.5″ to 11.25″ to use this bracket. If your chair has a … More Info

    BRACKET: Q04BR101

  • Motion Composites Apex C

    NOTE: Wheelchair must have camber tube and cross tube, and tube diameter must be between 0.875″ to 1.37″. Distance from cross tube to camber tube must be between 4.5″ to 11.25″ to use this bracket. If your chair has a … More Info

    BRACKET: Q04BR102

  • Motion Composites Helio A6

    Please verify all measurements (See “Wheelchair Measurement Guide” at top). NOTE:  For wheelchairs with a ground clearance 6″ or greater, please consider using The QLK 150 with a Base Mount Kit of 2.5″ or more.

    BRACKET: Q04BR001

  • Motion Composites Helio A7

    Please verify all measurements (See “Wheelchair Measurement Guide” at top). NOTE:  For wheelchairs with a ground clearance 6″ or greater, please consider using The QLK 150 with a Base Mount Kit of 2.5″ or more.

    BRACKET: Q04BR001

  • Motion Composites Helio C2

    Please verify all measurements (See “Wheelchair Measurement Guide” at top). NOTE:  For wheelchairs with a ground clearance 6″ or greater, please consider using The QLK 150 with a Base Mount Kit of 2.5″ or more.

    BRACKET: Q04BR001

  • Motion Composites Veloce

    Please verify all measurements (See “Wheelchair Measurement Guide” at top). NOTE:  For wheelchairs with a ground clearance 6″ or greater, please consider using The QLK 150 with a Base Mount Kit of 2.5″ or more.

    BRACKET: Q04BR001

  • Pride Mobility Jazzy Air 2

    Pride Mobility Jazzy Air 2

    The Jazzy Air Wheelchair Bracket is ONLY for Forward Entry Applications. Suspension adjustment may be necessary to clear certain thresholds and higher incline ramps.

    BRACKET: Q04BR104

  • Pride Mobility Jazzy EVO 613

    The Jazzy Evo 613 Wheelchair Bracket is ONLY for Forward Entry Applications. Suspension adjustment may be necessary to clear certain thresholds and higher incline ramps.

    BRACKET: Q04BR104

  • Pride Mobility Jazzy Select 6 2.0

    The Jazzy Select 6 2.0 Wheelchair Bracket is ONLY for Forward Entry Applications. Suspension adjustment may be necessary to clear certain thresholds and higher incline ramps.

    BRACKET: Q04BR104

  • Pride Mobility Quantum 4Front2

    NOTE: For additional ground clearance Q’straint strongly recommends using QLK-150 with optional 2.5″ base mount Kit (QS99022).

    BRACKET: Q04BR116

  • Pride Mobility Quantum 4Front2

    NOTE: For additional ground clearance Q’straint strongly recommends using QLK-150 with optional 2.5″ base mount Kit (QS99022).

    BRACKET: Q04BR117

  • Pride Mobility Quantum 4Front2 HD

    NOTE: For additional ground clearance Q’straint strongly recommends using QLK-150 with optional 2.5″ base mount Kit (QS99022).

    BRACKET: Q04BR116

  • Pride Mobility Quantum 4Front2 HD

    NOTE: For additional ground clearance Q’straint strongly recommends using QLK-150 with optional 2.5″ base mount Kit (QS99022).

    BRACKET: Q04BR117

  • Rigid Sport (A-Frame) / Lightweight Bracket

    TiLite Rigid ZRA

    Introducing the new lightweight rigid sport chair bracket. This bracket is 50% lighter than our traditional sports chair (A-Frame) bracket application. NOTE: Wheelchair must have camber tube and cross tube, and tube diameter must be between 0.875″ to 1.37″. Distance … More Info

    BRACKET: Q04BR133

  • Rigid Sport (A-Frame) / Lightweight Bracket

    TiLite Rigid ZRA

    Introducing the new lightweight rigid sport chair bracket. This bracket is 50% lighter than our traditional sports chair (A-Frame) bracket application. NOTE: Wheelchair must have camber tube and cross tube, and tube diameter must be between 0.875″ to 1.37″. Distance … More Info

    BRACKET: Q04BR135

  • Sunrise Medical Quickie Q300 M

    This bracket utilizes new technology which eliminates the traditional 5/8″ docking bolt. Please contact your sales representative for more information. Q’Straint recommends this bracket be used for the driver and front passenger positions in most vehicles. This bracket is also … More Info

    BRACKET: Q04BR138

  • Pride Mobility Quantum 4Front

    Pride Mobility Quantum 4Front

    NOTE: For additional ground clearance Q’straint strongly recommends using QLK-150 with optional 2.5″ base mount Kit (QS99022).

    BRACKET: Q04BR116

  • Whill Inc. Model M

    Whill Inc. Model M

    Q’Straint recommends this bracket be used for Second Row Passenger positions in most vehicles. Q04BR108 is recommended for Driver and Front Passenger Positions.

    BRACKET: Q04BR103

  • Whill Inc. Model A

    Whill Inc. Model A

    Q’Straint recommends this bracket be used for the Driver and Front Passenger positions in most vehicles. Q04BR103 is recommended for Second Row Passenger applications.

    BRACKET: Q04BR108

  • Permobil M Series M5

    Permobil M Series M5

    Q’Straint recommends this bracket be used only for second row passenger positions, when entering the vehicle from a side ramp. NOT to be used for driver and front passenger positions, or when entering vehicle from the rear ramp/lift. See Q04BR124 … More Info

    BRACKET: Q04BR125

  • Quantum Rehab Edge 3 Stretto

    Q’Straint recommends this bracket be used only for second row passenger positions, when entering the vehicle from a side ramp. NOT to be used for driver and front passenger positions, or when entering vehicle from the rear ramp/lift. See Q04BR129 … More Info

    BRACKET: Q04BR130

  • Permobil F Series F3

    Permobil F Series F3

    Q’Straint recommends this bracket be used for the driver and front passenger positions in most vehicles. This bracket is also used for second row position when entering from the rear ramp/lift. NOT to be used for second row passenger applications, … More Info

    BRACKET: Q04BR123

  • Permobil F Series F3

    Permobil F Series F3

    Q’Straint recommends this bracket be used only for second row passenger positions, when entering the vehicle from a side ramp. NOT to be used for driver and front passenger positions, or when entering vehicle from the rear ramp/lift. See Q04BR123 … More Info

    BRACKET: Q04BR122

  • Quantum Rehab Edge 3 Stretto

    Q’Straint recommends this bracket be used for the Driver and Front Passenger positions in most vehicles. Q04BR130 is recommended for Second Row Passenger applications. Note: This bracket comes with an integrated stabilizer. *** For back in applications (ex: ATC Conversion), … More Info

    BRACKET: Q04BR129

  • Any Rigid Sport-frame Wheelchair

    Any Rigid Sport-frame Wheelchair

    NOTE: Wheelchair must have camber tube and cross tube, and tube diameter must be between 0.875″ to 1.37″. Distance from cross tube to camber tube must be between 4.5″ to 11.25″ to use this bracket. If your chair has a … More Info

    BRACKET: Q04BR102

  • Amy Systems Alltrack M/ M3/ M4

    FS2221B N2221 – Battery Tray for Group 22 Batteries with a Narrow 21″ base width (Total base width = 21″)

    BRACKET: Non-Approved

  • Any Rigid Sport-frame Wheelchair

    Any Rigid Sport-frame Wheelchair

    NOTE: Wheelchair must have camber tube and cross tube, and tube diameter must be between 0.875″ to 1.37″. Distance from cross tube to camber tube must be between 4.5″ to 11.25″ to use this bracket. If your chair has a … More Info

    BRACKET: Q04BR101

  • Broda 550 Tilt Recliner

    Broda 550 Tilt Recliner

    Can only be used with Broda WC-19 compliant Vehicle Transport Package Option.

    BRACKET: Q04BR001

  • Broda 785 Tilt Recliner

    Broda 785 Tilt Recliner

    Can only be used with Broda WC-19 compliant Vehicle Transport Package Option.

    BRACKET: Q04BR001

  • Bruno PWC PWC-2200

    Bruno PWC PWC-2200

    Will not fit power seat post, PWC-23106

    BRACKET: Non-Approved

  • Bruno PWC PWC-2300

    Bruno PWC PWC-2300

    Will not fit power seat post, PWC-23106

    BRACKET: Non-Approved

  • Drive Medical Cobalt X14

    Drive Medical Cobalt X14

    BRACKET: Non-Approved

  • Drive Medical Cobalt X16

    Drive Medical Cobalt X16

    BRACKET: Non-Approved

  • Eagle 624 XL 642

    Eagle 624 XL 642

    BRACKET: Non-Approved

  • Eagle Liberty 624-SL

    Eagle Liberty 624-SL

    BRACKET: Non-Approved

  • Electric Mobility P Series P301

    Electric Mobility P Series P301

    Chair discontinued by manufacturer. 

    BRACKET: Non-Approved

  • Electric Mobility P Series P710

    Electric Mobility P Series P710

    Chair discontinued by manufacturer. 

    BRACKET: Non-Approved

  • Falcon Rehab Traxx Outdoor

    Falcon Rehab Traxx Outdoor

    Must have a rear tire size of 12 1/2″ x 2 1/4″

    BRACKET: Non-Approved

  • Freedom Design TriPod LT

    Freedom Design TriPod LT

    BRACKET: Non-Approved

  • Golden Technologies Alante

    Golden Technologies Alante

    BRACKET: Non-Approved

  • Golden Technologies LiteRider PTC Portable GP162

    Golden Technologies LiteRider PTC Portable GP162

    Take-apart frame.  This wheelchair is not recommended for transport, and will not work with the QLK docking systems.

    BRACKET: Non-Approved

  • HandiCare Ibis XP

    HandiCare Ibis XP

    BRACKET: Non-Approved

  • Heartland Mobility CTM HS 1000

    Heartland Mobility CTM HS 1000

    BRACKET: Non-Approved

  • Hoveround MPV 4

    Hoveround MPV 4

    Hoveround does not recommend use with QLK

    BRACKET: Non-Approved

  • Hoveround MPV 5

    Hoveround MPV 5

    BRACKET: Non-Approved

  • IMC Heartway Allure

    IMC Heartway Allure

    BRACKET: Non-Approved

  • IMC Heartway Escape

    IMC Heartway Escape

    Not recommended for use with QLK

    BRACKET: Non-Approved

  • IMC Heartway Fantasy

    IMC Heartway Fantasy

    Not recommended for use with QLK

    BRACKET: Non-Approved

  • IMC Heartway Mini

    IMC Heartway Mini

    Not recommended for use with QLK

    BRACKET: Non-Approved

  • IMC Heartway Puzzle

    IMC Heartway Puzzle

    Not recommended for use with QLK

    BRACKET: Non-Approved

  • IMC Heartway Rumba

    IMC Heartway Rumba

    Not recommended for use with QLK

    BRACKET: Non-Approved

  • IMC Heartway Sahara

    IMC Heartway Sahara

    Not recommended for use with QLK

    BRACKET: Non-Approved

  • IMC Heartway Smart

    IMC Heartway Smart

    Not recommended for use with QLK

    BRACKET: Non-Approved

  • IMC Heartway Tango

    IMC Heartway Tango

    Not recommended for use with QLK

    BRACKET: Non-Approved

  • IMC Heartway Tempo

    IMC Heartway Tempo

    Chair discontinued by manufacturer. 

    BRACKET: Non-Approved

  • IMC Heartway Tiara

    IMC Heartway Tiara

    Not recommended for use with QLK

    BRACKET: Non-Approved

  • IMC Heartway Titan

    IMC Heartway Titan

    Not recommended for use with QLK

    BRACKET: Non-Approved

  • IMC Heartway Vision

    IMC Heartway Vision

    Not recommended for use with QLK

    BRACKET: Non-Approved

  • IMC Heartway Vital

    IMC Heartway Vital

    Not recommended for use with QLK

    BRACKET: Non-Approved

  • Innovation in Motion Frontier X5

    Innovation in Motion Frontier X5

    Will not work with elevating seat models.

    BRACKET: Non-Approved

  • Invacare A4

    Invacare A4

    Low Seat Back Option not approved: Also cross tube is not horizontal

    BRACKET: Non-Approved

  • Invacare Excel

    Invacare Excel

    BRACKET: Non-Approved

  • Invacare Power 9000 Series (Storm, XDT)

    Invacare Power 9000 Storm Series

    The Storm series has oval shaped frame tubing

    BRACKET: Non-Approved

  • Invacare Power P7E

    Invacare Power P7E

    (NOT THE STORM SERIES) Measure frame width, outside to outside (16″, 18″, 20″).

    BRACKET: Non-Approved

  • Invacare Pronto M41

    Invacare Pronto M41

    BRACKET: Non-Approved

  • Permobil M Series M5

    Permobil M Series M5

    Q’Straint recommends this bracket be used for the driver and front passenger positions in most vehicles. This bracket is also used for second row position when entering from the rear ramp/lift. NOT to be used for second row passenger applications, … More Info

    BRACKET: Q04BR124

  • Invacare Pronto P31

    Invacare Pronto P31

    Low Ground Clearance – Must use QLK-150 with 1.5″ Base Mounts (#QS99020). Clearance under docking pin will be greater than 1″. This Kit features our QLK-150 Advanced Stabilizer. Forward entry recommended

    BRACKET: Q04BR095

  • Invacare Spree XT

    Invacare Spree XT

    BRACKET: Non-Approved

  • Invacare Spree XT

    Invacare Spree XT

    BRACKET: Non-Approved

  • Invacare Storm Arrow (Front Wheel Drive)

    Invacare Storm Arrow (Front Wheel Drive)

    Front wheel drive, Arrow Storm series power wheelchair

    BRACKET: Non-Approved

  • Invacare Storm Ranger X 5M

    Invacare Storm Ranger X 5M

    Belt driven power wheelchair. Power seating may prohibit bracket installation

    BRACKET: Non-Approved

  • Invacare Xterra

    Invacare Xterra

    Forward Entry Only. Must not have reclining van seat.

    BRACKET: Non-Approved

  • Kuschall Champ 1000

    Kuschall Champ 1000

    NOTE: Wheelchair must have camber tube and cross tube, and tube diameter must be between 0.875″ to 1.37″. Distance from cross tube to camber tube must be between 4.5″ to 11.25″ to use this bracket. If your chair has a … More Info

    BRACKET: Q04BR101

  • Kuschall Champ 1000

    Kuschall Champ 1000

    NOTE: Wheelchair must have camber tube and cross tube, and tube diameter must be between 0.875″ to 1.37″. Distance from cross tube to camber tube must be between 4.5″ to 11.25″ to use this bracket. If your chair has a … More Info

    BRACKET: Q04BR102

  • Kuschall K K3

    Kuschall K K3

    NOTE: Wheelchair must have camber tube and cross tube, and tube diameter must be between 0.875″ to 1.37″. Distance from cross tube to camber tube must be between 4.5″ to 11.25″ to use this bracket. If your chair has a … More Info

    BRACKET: Q04BR101

  • Kuschall K K3

    Kuschall K K3

    NOTE: Wheelchair must have camber tube and cross tube, and tube diameter must be between 0.875″ to 1.37″. Distance from cross tube to camber tube must be between 4.5″ to 11.25″ to use this bracket. If your chair has a … More Info

    BRACKET: Q04BR102