Showing 1–80 of 89 results

  • Motion Composites Helio A6

    Please verify all measurements (See “Wheelchair Measurement Guide” at top). NOTE:  For wheelchairs with a ground clearance 6″ or greater, please consider using The QLK 150 with a Base Mount Kit of 2.5″ or more.

    BRACKET: Q04BR001

  • Motion Composites Helio A7

    Please verify all measurements (See “Wheelchair Measurement Guide” at top). NOTE:  For wheelchairs with a ground clearance 6″ or greater, please consider using The QLK 150 with a Base Mount Kit of 2.5″ or more.

    BRACKET: Q04BR001

  • Motion Composites Helio C2

    Please verify all measurements (See “Wheelchair Measurement Guide” at top). NOTE:  For wheelchairs with a ground clearance 6″ or greater, please consider using The QLK 150 with a Base Mount Kit of 2.5″ or more.

    BRACKET: Q04BR001

  • Motion Composites Veloce

    Please verify all measurements (See “Wheelchair Measurement Guide” at top). NOTE:  For wheelchairs with a ground clearance 6″ or greater, please consider using The QLK 150 with a Base Mount Kit of 2.5″ or more.

    BRACKET: Q04BR001

  • Any Manual Wheelchair

    Any Manual Wheelchair

    Please verify all measurements (See “Wheelchair Measurement Guide” at top). NOTE:  For wheelchairs with a ground clearance 6″ or greater, please consider using The QLK 150 with a Base Mount Kit of 2.5″ or more.

    BRACKET: Q04BR001

  • Any Manual Wheelchair

    Any Manual Wheelchair

    Please verify all measurements (See “Wheelchair Measurement Guide” at top). 

    BRACKET: Q04BR003

  • Broda 550 Tilt Recliner

    Broda 550 Tilt Recliner

    Can only be used with Broda WC-19 compliant Vehicle Transport Package Option.

    BRACKET: Q04BR001

  • Broda 785 Tilt Recliner

    Broda 785 Tilt Recliner

    Can only be used with Broda WC-19 compliant Vehicle Transport Package Option.

    BRACKET: Q04BR001

  • Colours Acti-Fold

    Colours Acti-Fold

    Please verify all measurements (See “Wheelchair Measurement Guide” at top). Installing bracket will keep the chair rigid and no longer allow it to fold. NOTE:  For wheelchairs with a ground clearance 6″ or greater, please consider using The QLK 150 … More Info

    BRACKET: Q04BR001

  • Colours Eclipse

    Colours Eclipse

    Please verify all measurements (See “Wheelchair Measurement Guide” at top). NOTE: For wheelchairs with a ground clearance 6″ or greater, please consider using The QLK 150, with a Base Mount Kit of 2.5″ or more

    BRACKET: Q04BR001

  • Drive Medical Cirrus III

    Drive Medical Cirrus III

    Please verify all measurements (See “Wheelchair Measurement Guide” at top). Standard Tubing is 1″ and Frame Rail +6″NOTE: For wheelchairs with a ground clearance 6″ or greater, please consider using The QLK 150, with a Base Mount Kit of 2.5″ … More Info

    BRACKET: Q04BR001

  • Drive Medical Cirrus IV

    Drive Medical Cirrus IV

    Please verify all measurements (See “Wheelchair Measurement Guide” at top). Standard Tubing is 1″ and Frame Rail +6″NOTE: For wheelchairs with a ground clearance 6″ or greater, please consider using The QLK 150, with a Base Mount Kit of 2.5″ … More Info

    BRACKET: Q04BR001

  • Falcon Rehab SP3

    Falcon Rehab SP3

    Please verify all measurements (See “Wheelchair Measurement Guide” at top). NOTE: For wheelchairs with a ground clearance 6″ or greater, please consider using The QLK 150, with a Base Mount Kit of 2.5″ or more

    BRACKET: Q04BR001

  • Freedom Design 2

    Freedom Design 2

    Please verify all measurements (See “Wheelchair Measurement Guide” at top). NOTE: For wheelchairs with a ground clearance 6″ or greater, please consider using The QLK 150, with a Base Mount Kit of 2.5″ or more

    BRACKET: Q04BR001

  • Freedom Design Gizmo

    Freedom Design Gizmo

    Please verify all measurements (See “Wheelchair Measurement Guide” at top). Standard Tubing is 1″ and Frame Rail +6″ NOTE:  For wheelchairs with a ground clearance 6″ or greater, please consider using The QLK 150 with a Base Mount Kit of … More Info

    BRACKET: Q04BR001

  • Freedom Design Libre

    Freedom Design Libre

    Please verify all measurements (See “Wheelchair Measurement Guide” at top). Standard Tubing is 1″ and Frame Rail +6″ NOTE:  For wheelchairs with a ground clearance 6″ or greater, please consider using The QLK 150 with a Base Mount Kit of … More Info

    BRACKET: Q04BR001

  • Freedom Design SP3

    Freedom Design SP3

    Please verify all measurements (See “Wheelchair Measurement Guide” at top). Standard Tubing is 1″ and Frame Rail +6″ NOTE:  For wheelchairs with a ground clearance 6″ or greater, please consider using The QLK 150 with a Base Mount Kit of … More Info

    BRACKET: Q04BR001

  • Gunnell

    Gunnell

    Please verify all measurements (See “Wheelchair Measurement Guide” at top). NOTE: For wheelchairs with a ground clearance 6″ or greater, please consider using The QLK 150, with a Base Mount Kit of 2.5″ or more

    BRACKET: Q04BR001

  • Invacare 9000 Series (Topaz, XDT, SL)

    Invacare 9000 Series (Topaz, XDT, SL)

    Please verify all measurements (See “Wheelchair Measurement Guide” at top). Standard Tubing is 1″ and Frame Rail +6″ NOTE:  For wheelchairs with a ground clearance 6″ or greater, please consider using The QLK 150 with a Base Mount Kit of … More Info

    BRACKET: Q04BR001

  • Invacare 9000 Series (Topaz, XDT, SL)

    Invacare 9000 Series (Topaz, XDT, SL)

    Please verify all measurements (See “Wheelchair Measurement Guide” at top).

    BRACKET: Q04BR003

  • Invacare 9000 XT

    Invacare 9000 XT

    Please verify all measurements (See “Wheelchair Measurement Guide” at top). Chair may have Bi-level frame – Center Strap of bracket may need to be bent. NOTE:  For wheelchairs with a ground clearance 6″ or greater, please consider using The QLK … More Info

    BRACKET: Q04BR001

  • Invacare 9000 XT

    Invacare 9000 XT

    Please verify all measurements (See “Wheelchair Measurement Guide” at top). Chair may have Bi-level frame – Center Strap of bracket may need to be bent.

    BRACKET: Q04BR003

  • Invacare Action A-T

    Invacare Action A-T

    Please verify all measurements (See “Wheelchair Measurement Guide” at top). Standard Tubing is 1″ and Frame Rail +6″ NOTE:  For wheelchairs with a ground clearance 6″ or greater, please consider using The QLK 150 with a Base Mount Kit of … More Info

    BRACKET: Q04BR001

  • Invacare Action Comet

    Invacare Action Comet

    Please verify all measurements (See “Wheelchair Measurement Guide” at top). Standard Tubing is 1″ NOTE:  For wheelchairs with a ground clearance 6″ or greater, please consider using The QLK 150 with a Base Mount Kit of 2.5″ or more

    BRACKET: Q04BR001

  • Invacare Action Comet

    Invacare Action Comet

    Please verify all measurements (See “Wheelchair Measurement Guide” at top). Standard Tubing is 1″

    BRACKET: Q04BR003

  • Invacare Action Junior

    Invacare Action Junior

    Please verify all measurements (See “Wheelchair Measurement Guide” at top). Standard Tubing is 1″ and Frame Rail +6″ NOTE:  For wheelchairs with a ground clearance 6″ or greater, please consider using The QLK 150 with a Base Mount Kit of … More Info

    BRACKET: Q04BR001

  • Invacare Action MVP Series

    Invacare Action MVP Series

    Please verify all measurements (See “Wheelchair Measurement Guide” at top). Installing bracket will keep the chair rigid and no longer allow it to fold. NOTE:  For wheelchairs with a ground clearance 6″ or greater, please consider using The QLK 150 … More Info

    BRACKET: Q04BR001

  • Invacare Action Orbit

    Invacare Action Orbit

    Please verify all measurements (See “Wheelchair Measurement Guide” at top). Standard Tubing is 1″ NOTE:  For wheelchairs with a ground clearance 6″ or greater, please consider using The QLK 150 with a Base Mount Kit of 2.5″ or more

    BRACKET: Q04BR001

  • Invacare Action Orbit

    Invacare Action Orbit

    Please verify all measurements (See “Wheelchair Measurement Guide” at top). Standard Tubing is 1″

    BRACKET: Q04BR003

  • Invacare Action Patriot

    Invacare Action Patriot

    Please verify all measurements (See “Wheelchair Measurement Guide” at top). Standard Tubing is 1″ and Frame Rail +6″ NOTE:  For wheelchairs with a ground clearance 6″ or greater, please consider using The QLK 150 with a Base Mount Kit of … More Info

    BRACKET: Q04BR001

  • Invacare Action Super Pro-T

    Invacare Action Super Pro-T

    Please verify all measurements (See “Wheelchair Measurement Guide” at top). Standard Tubing is 1″ NOTE:  For wheelchairs with a ground clearance 6″ or greater, please consider using The QLK 150 with a Base Mount Kit of 2.5″ or more

    BRACKET: Q04BR001

  • Invacare Action Super Pro-T

    Invacare Action Super Pro-T

    Please verify all measurements (See “Wheelchair Measurement Guide” at top). Standard Tubing is 1″

    BRACKET: Q04BR003

  • Invacare Action Tiger

    Invacare Action Tiger

    Please verify all measurements (See “Wheelchair Measurement Guide” at top). Standard Tubing is 1″ and Frame Rail +6″ NOTE:  For wheelchairs with a ground clearance 6″ or greater, please consider using The QLK 150 with a Base Mount Kit of … More Info

    BRACKET: Q04BR001

  • Invacare Action Xtra

    Invacare Action Xtra

    Please verify all measurements (See “Wheelchair Measurement Guide” at top). Standard Tubing is 1″ and Frame Rail +6″ NOTE:  For wheelchairs with a ground clearance 6″ or greater, please consider using The QLK 150 with a Base Mount Kit of … More Info

    BRACKET: Q04BR001

  • Invacare Atlas

    Invacare Atlas

    Please verify all measurements (See “Wheelchair Measurement Guide” at top). NOTE: For wheelchairs with a ground clearance 6″ or greater, please consider using The QLK 150, with a Base Mount Kit of 2.5″ or more

    BRACKET: Q04BR001

  • Invacare AX3

    Invacare AX3

    Please verify all measurements (See “Wheelchair Measurement Guide” at top). Installing bracket will keep the chair rigid and no longer allow it to fold. Bracket will add up to 15 lbs. of extra weight to chair. NOTE:  For wheelchairs with … More Info

    BRACKET: Q04BR001

  • Invacare Careguard K 4000

    Invacare Careguard K 4000

    Please verify all measurements (See “Wheelchair Measurement Guide” at top). NOTE: For wheelchairs with a ground clearance 6″ or greater, please consider using The QLK 150, with a Base Mount Kit of 2.5″ or more

    BRACKET: Q04BR001

  • Invacare Compass SPT/XE

    Invacare Compass SPT/XE

    Please verify all measurements (See “Wheelchair Measurement Guide” at top). NOTE: For wheelchairs with a ground clearance 6″ or greater, please consider using The QLK 150, with a Base Mount Kit of 2.5″ or more

    BRACKET: Q04BR001

  • Invacare Compass SPT/XE

    Invacare Compass SPT/XE

    Please verify all measurements (See “Wheelchair Measurement Guide” at top).

    BRACKET: Q04BR003

  • Invacare Ride Lite 9000

    Invacare Ride Lite 9000

    Please verify all measurements (See “Wheelchair Measurement Guide” at top). Standard Tubing is 1″ and Frame Rail +6″ NOTE:  For wheelchairs with a ground clearance 6″ or greater, please consider using The QLK 150 with a Base Mount Kit of … More Info

    BRACKET: Q04BR001

  • Invacare Rolls Series (900, 2000, 4000)

    Invacare Rolls Series (900, 2000, 4000)

    Please verify all measurements (See “Wheelchair Measurement Guide” at top). Standard Tubing is 1″ and Frame Rail +6″ NOTE:  For wheelchairs with a ground clearance 6″ or greater, please consider using The QLK 150 with a Base Mount Kit of … More Info

    BRACKET: Q04BR001

  • Invacare Rolls Series (900, 2000, 4000)

    Invacare Rolls Series (900, 2000, 4000)

    Please verify all measurements (See “Wheelchair Measurement Guide” at top).

    BRACKET: Q04BR003

  • Invacare Solara Jr

    Invacare Solara Jr

    Please verify all measurements (See “Wheelchair Measurement Guide” at top).

    BRACKET: Q04BR003

  • Invacare Spree GT

    Invacare Spree GT

    Wheelchair has 1″ diameter tubing; frame-rail is less than 6″ the from the floor.

    BRACKET: Q04BR003

  • Invacare Spree XT

    Invacare Spree XT

    BRACKET: Non-Approved

  • Invacare Spree XT

    Invacare Spree XT

    BRACKET: Non-Approved

  • Invacare Tracer Series (EX2, SX5, IV)

    Invacare Tracer Series (EX2, SX5, IV)

    Please verify all measurements (See “Wheelchair Measurement Guide” at top). NOTE: For wheelchairs with a ground clearance 6″ or greater, please consider using The QLK 150, with a Base Mount Kit of 2.5″ or more

    BRACKET: Q04BR001

  • Invacare Tracer Series (EX2, SX5, IV)

    Invacare Tracer Series (EX2, SX5, IV)

    Please verify all measurements (See “Wheelchair Measurement Guide” at top).

    BRACKET: Q04BR003

  • Invacare YM 3000

    Invacare YM 3000

    Please verify all measurements (See “Wheelchair Measurement Guide” at top). NOTE: For wheelchairs with a ground clearance 6″ or greater, please consider using The QLK 150, with a Base Mount Kit of 2.5″ or more

    BRACKET: Q04BR001

  • Invacare YM 3000

    Invacare YM 3000

    Please verify all measurements (See “Wheelchair Measurement Guide” at top). 

    BRACKET: Q04BR003

  • Invacare Youthmobile 3000

    Invacare Youthmobile 3000

    Please verify all measurements (See “Wheelchair Measurement Guide” at top). Standard Tubing is 1″ and Frame Rail -6″

    BRACKET: Q04BR003

  • Invacare Youthmobile 9000

    Invacare Youthmobile 9000

    Please verify all measurements (See “Wheelchair Measurement Guide” at top). Standard Tubing is 1″ and Frame Rail +6″ NOTE:  For wheelchairs with a ground clearance 6″ or greater, please consider using The QLK 150 with a Base Mount Kit of … More Info

    BRACKET: Q04BR001

  • KI Mobility Catalyst 4 & 5

    KI Mobility Catalyst 4 & 5

    Please verify all measurements (See “Wheelchair Measurement Guide” at top). Installing bracket will keep the chair rigid and no longer allow it to fold. NOTE:  For wheelchairs with a ground clearance 6″ or greater, please consider using The QLK 150 … More Info

    BRACKET: Q04BR001

  • KI Mobility Catalyst 5ti

    KI Mobility Catalyst 5ti

    Please verify all measurements (See “Wheelchair Measurement Guide” at top). Installing bracket will keep the chair rigid and no longer allow it to fold. Bracket will add up to 15 lbs. of extra weight to chair. NOTE: For wheelchairs with … More Info

    BRACKET: Q04BR001

  • KI Mobility Spark

    KI Mobility Spark

    Please verify all measurements (See “Wheelchair Measurement Guide” at top). Installing bracket will keep the chair rigid and no longer allow it to fold. Bracket will add up to 15 lbs. of extra weight to chair. NOTE: For wheelchairs with … More Info

    BRACKET: Q04BR001

  • Medline Excel 1000/2000

    Medline Excel 1000/2000

    Please verify all measurements (See “Wheelchair Measurement Guide” at top).

    BRACKET: Q04BR003

  • Medline Excel 1000/2000

    Medline Excel 1000/2000

    Please verify all measurements (See “Wheelchair Measurement Guide” at top). NOTE: For wheelchairs with a ground clearance 6″ or greater, please consider using The QLK 150, with a Base Mount Kit of 2.5″ or more

    BRACKET: Q04BR001

  • Medline Excel K1

    Medline Excel K1

    Please verify all measurements (See “Wheelchair Measurement Guide” at top).

    BRACKET: Q04BR003

  • Medline Excel K4

    Medline Excel K4

    Please verify all measurements (See “Wheelchair Measurement Guide” at top). NOTE: For wheelchairs with a ground clearance 6″ or greater, please consider using The QLK 150, with a Base Mount Kit of 2.5″ or more

    BRACKET: Q04BR001

  • Physipro IXEL

    Physipro IXEL

    Please verify all measurements (See “Wheelchair Measurement Guide” at top).            NOTE:  For wheelchairs with a ground clearance 6″ or greater, please consider using The QLK 150 with a Base Mount Kit of 2.5″ or more.

    BRACKET: Q04BR001

  • Physipro XL5

    Physipro XL5

    Please verify all measurements (See “Wheelchair Measurement Guide” at top)NOTE:  For wheelchairs with a ground clearance 6″ or greater, please consider using The QLK 150 with a Base Mount Kit of 2.5″ or more. 

    BRACKET: Q04BR001

  • Pride Mobility Quantum LiteStream XF

    Pride Mobility Quantum LifeStream XF

    Please verify all measurements (See “Wheelchair Measurement Guide” at top). NOTE: For wheelchairs with a ground clearance 6″ or greater, please consider using The QLK 150, with a Base Mount Kit of 2.5″ or more

    BRACKET: Q04BR001

  • Pride Mobility Quantum LiteStream XF

    Pride Mobility Quantum LifeStream XF

    Please verify all measurements (See “Wheelchair Measurement Guide” at top).

    BRACKET: Q04BR003

  • Pride Mobility Stylus

    Pride Mobility Stylus

    Please verify all measurements (See “Wheelchair Measurement Guide” at top). NOTE: For wheelchairs with a ground clearance 6″ or greater, please consider using The QLK 150, with a Base Mount Kit of 2.5″ or more

    BRACKET: Q04BR001

  • Summit Manual

    Summit Manual

    Please verify all measurements (See “Wheelchair Measurement Guide” at top). Standard Tubing is 1″ and Frame Rail +6″ NOTE:  For wheelchairs with a ground clearance 6″ or greater, please consider using The QLK 150 with a Base Mount Kit of … More Info

    BRACKET: Q04BR001

  • Summit Manual

    Summit Manual

    Please verify all measurements (See “Wheelchair Measurement Guide” at top). Standard Tubing is 1″ and Frame Rail +6″ NOTE:  For wheelchairs with a ground clearance 6″ or greater, please consider using The QLK 150 with a Base Mount Kit of … More Info

    BRACKET: Q04BR001

  • Sunrise Medical Quickie 2

    Sunrise Medical Quickie 2

    Tubing size may vary –  Please verify all measurements (See “Wheelchair Measurement Guide” at top). Standard Tubing is 1″ and Frame Rail +6″ NOTE:  For wheelchairs with a ground clearance 6″ or greater, please consider using The QLK 150 with … More Info

    BRACKET: Q04BR001

  • Sunrise Medical Quickie 2HP

    Sunrise Medical Quickie 2HP

    Please verify all measurements (See “Wheelchair Measurement Guide” at top). Standard Tubing is 1″ and Frame Rail +6″ NOTE:  For wheelchairs with a ground clearance 6″ or greater, please consider using The QLK 150 with a Base Mount Kit of … More Info

    BRACKET: Q04BR001

  • Sunrise Medical Quickie Breezy (1, 2, 600, Ultra 4)

    Sunrise Medical Quickie Breezy (1, 2, 600, Ultra 4)

    Please verify all measurements (See “Wheelchair Measurement Guide” at top). Standard Tubing is 1″ and Frame Rail +6″ NOTE:  For wheelchairs with a ground clearance 6″ or greater, please consider using The QLK 150 with a Base Mount Kit of … More Info

    BRACKET: Q04BR001

  • Sunrise Medical Quickie Breezy (1, 2, 600, Ultra 4)

    Sunrise Medical Quickie Breezy (1, 2, 600, Ultra 4)

    Please verify all measurements (See “Wheelchair Measurement Guide” at top). Confirm Height on Breezy 600, some options may have -6″ Frame. Wheelchair discontinued by manufacturer.

    BRACKET: Q04BR003

  • Sunrise Medical Quickie GP/GPV

    Sunrise Medical Quickie GP/GPV

    Please verify all measurements (See “Wheelchair Measurement Guide” at top). Standard Tubing is 1″ and Frame Rail +6″. SINGLE FOOTREST:  NOTE:  For wheelchairs with a ground clearance 6″ or greater, please consider using The QLK 150 with a Base Mount … More Info

    BRACKET: Q04BR001

  • Sunrise Medical Quickie LX

    Sunrise Medical Quickie LX

    Please verify all measurements (See “Wheelchair Measurement Guide” at top). NOTE: For wheelchairs with a ground clearance 6″ or greater, please consider using The QLK 150, with a Base Mount Kit of 2.5″ or more

    BRACKET: Q04BR001

  • Sunrise Medical Quickie LXI

    Sunrise Medical Quickie LXI

    Please verify all measurements (See “Wheelchair Measurement Guide” at top). Installing bracket will keep the chair rigid and no longer allow it to fold. NOTE:  For wheelchairs with a ground clearance 6″ or greater, please consider using The QLK 150 … More Info

    BRACKET: Q04BR001

  • Sunrise Medical Quickie M6

    Sunrise Medical Quickie M6

    Please verify all measurements (See “Wheelchair Measurement Guide” at top). NOTE: For wheelchairs with a ground clearance 6″ or greater, please consider using The QLK 150, with a Base Mount Kit of 2.5″ or more

    BRACKET: Q04BR001

  • Sunrise Medical Quickie QXi

    Sunrise Medical Quickie QXi

    Please verify all measurements (See “Wheelchair Measurement Guide” at top). NOTE: For wheelchairs with a ground clearance 6″ or greater, please consider using The QLK 150, with a Base Mount Kit of 2.5″ or more

    BRACKET: Q04BR001

  • Sunrise Medical Quickie Tilt FX

    Sunrise Medical Quickie Tilt FX

    Please verify all measurements (See “Wheelchair Measurement Guide” at top). NOTE: For wheelchairs with a ground clearance 6″ or greater, please consider using The QLK 150, with a Base Mount Kit of 2.5″ or more

    BRACKET: Q04BR001

  • Sunrise Medical Quickie Zippie 2

    Sunrise Medical Quickie Zippie 2

    Please verify all measurements (See “Wheelchair Measurement Guide” at top). Installing bracket will keep the chair rigid and no longer allow it to fold. NOTE:  For wheelchairs with a ground clearance 6″ or greater, please consider using The QLK 150 … More Info

    BRACKET: Q04BR001

  • Sunrise Medical Quickie Zippie Series (2, TS, GS)

    Sunrise Medical Quickie Zippie Series (2, TS, GS)

    Please verify all measurements (See “Wheelchair Measurement Guide” at top). Standard Tubing is 1″, Check Rail Height.

    BRACKET: Q04BR003

  • Sunrise Medical Zippie Series (2, TS, GS)

    Sunrise Medical Zippie Series (2, TS, GS)

    Please verify all measurements (See “Wheelchair Measurement Guide” at top). Standard Tubing is 1″, Check Rail Height. NOTE:  For wheelchairs with a ground clearance 6″ or greater, please consider using The QLK 150 with a Base Mount Kit of 2.5″ … More Info

    BRACKET: Q04BR001

  • TiLite Folding 2GX

    TiLite Folding 2GX

    Please verify all measurements (See “Wheelchair Measurement Guide” at top). Standard Tubing is 1″ and Frame Rail +6″ NOTE:  For wheelchairs with a ground clearance 6″ or greater, please consider using The QLK 150 with a Base Mount Kit of … More Info

    BRACKET: Q04BR001