Chair has threaded mounting hole for 5/8″ docking bolt from factory. This part is a Drivers Kit, which is comprised of the docking bolt, advanced stabilizer, and stabilizer hardware to be used with the QLK-150.

Chair has threaded mounting hole for 5/8″ docking bolt from factory. This part is a Drivers Kit, which is comprised of the docking bolt, advanced stabilizer, and stabilizer hardware to be used with the QLK-150.

Chair has threaded mounting hole for 5/8″ docking bolt from factory. This part is a Drivers Kit, which is comprised of the docking bolt, advanced stabilizer, and stabilizer hardware to be used with the QLK-150.

**NARROWFRM option on order form**

Narrow base 22.4″ (uses 2 M50 Batteries)

**STDFRM option on order form**

Standard base 24.8″ (uses 2 Group 24 Batteries)

Chair has threaded mounting hole for 5/8″ docking bolt from factory. This part is a Drivers Kit, which is comprised of the docking bolt, advanced stabilizer, and stabilizer hardware to be used with the QLK-150.

NOTE: Wheelchair must have camber tube and cross tube, and tube diameter must be between 0.875″ to 1.37″. Distance from cross tube to camber tube must be between 4.5″ to 11.25″ to use this bracket. If your chair has a … More Info

NOTE: Wheelchair must have camber tube and cross tube, and tube diameter must be between 0.875″ to 1.37″. Distance from cross tube to camber tube must be between 4.5″ to 11.25″ to use this bracket. If your chair has a … More Info

NOTE: Wheelchair must have camber tube and cross tube, and tube diameter must be between 0.875″ to 1.37″. Distance from cross tube to camber tube must be between 4.5″ to 11.25″ to use this bracket. If your chair has a … More Info

NOTE: Wheelchair must have camber tube and cross tube, and tube diameter must be between 0.875″ to 1.37″. Distance from cross tube to camber tube must be between 4.5″ to 11.25″ to use this bracket. If your chair has a … More Info

Please verify all measurements (See “Wheelchair Measurement Guide” at top). NOTE:  For wheelchairs with a ground clearance 6″ or greater, please consider using The QLK 150 with a Base Mount Kit of 2.5″ or more.

Please verify all measurements (See “Wheelchair Measurement Guide” at top). NOTE:  For wheelchairs with a ground clearance 6″ or greater, please consider using The QLK 150 with a Base Mount Kit of 2.5″ or more.

Please verify all measurements (See “Wheelchair Measurement Guide” at top). NOTE:  For wheelchairs with a ground clearance 6″ or greater, please consider using The QLK 150 with a Base Mount Kit of 2.5″ or more.

Please verify all measurements (See “Wheelchair Measurement Guide” at top). NOTE:  For wheelchairs with a ground clearance 6″ or greater, please consider using The QLK 150 with a Base Mount Kit of 2.5″ or more.

The Jazzy Evo 613 Wheelchair Bracket is ONLY for Forward Entry Applications. Suspension adjustment may be necessary to clear certain thresholds and higher incline ramps.

The Jazzy Select 6 2.0 Wheelchair Bracket is ONLY for Forward Entry Applications. Suspension adjustment may be necessary to clear certain thresholds and higher incline ramps.

NOTE: For additional ground clearance Q’straint strongly recommends using QLK-150 with optional 2.5″ base mount Kit (QS99022).

NOTE: For additional ground clearance Q’straint strongly recommends using QLK-150 with optional 2.5″ base mount Kit (QS99022).

NOTE: For additional ground clearance Q’straint strongly recommends using QLK-150 with optional 2.5″ base mount Kit (QS99022).

NOTE: For additional ground clearance Q’straint strongly recommends using QLK-150 with optional 2.5″ base mount Kit (QS99022).

Introducing the new lightweight rigid sport chair bracket. This bracket is 50% lighter than our traditional sports chair (A-Frame) bracket application. NOTE: Wheelchair must have camber tube and cross tube, and tube diameter must be between 0.875″ to 1.37″. Distance … More Info

Introducing the new lightweight rigid sport chair bracket. This bracket is 50% lighter than our traditional sports chair (A-Frame) bracket application. NOTE: Wheelchair must have camber tube and cross tube, and tube diameter must be between 0.875″ to 1.37″. Distance … More Info

This bracket utilizes new technology which eliminates the traditional 5/8″ docking bolt. Please contact your sales representative for more information. Q’Straint recommends this bracket be used for the driver and front passenger positions in most vehicles. This bracket is also … More Info

Model discontinued by manufacturer.

FS2221B N2221 – Battery Tray for Group 22 Batteries with a Narrow 21″ base width (Total base width = 21″)

FS2424B N2424 – Battery Tray for Group 24 Batteries with a Narrow 24″ base width (Total base width = 24″)

FS22B Battery Tray for Group 22NF Batteries – (Total base width = 23 3/8″)

FS24B Battery Tray for Group 24 Batteries – (Total base width = 25 3/8″)

NOTE: Wheelchair must have camber tube and cross tube, and tube diameter must be between 0.875″ to 1.37″. Distance from cross tube to camber tube must be between 4.5″ to 11.25″ to use this bracket. If your chair has a … More Info

Please verify all measurements (See “Wheelchair Measurement Guide” at top). Standard Tubing is 7/8″ NOTE:  For wheelchairs with a ground clearance 6″ or greater, please consider using The QLK 150 with a Base Mount Kit of 2.5″ or more

Please verify all measurements (See “Wheelchair Measurement Guide” at top). Standard Tubing is 7/8″

Can only be used with Broda WC-19 compliant Vehicle Transport Package Option.

Can only be used with Broda WC-19 compliant Vehicle Transport Package Option.

Will not fit power seat post, PWC-23106

Will not fit power seat post, PWC-23106

Please verify all measurements (See “Wheelchair Measurement Guide” at top). Installing bracket will keep the chair rigid and no longer allow it to fold. NOTE:  For wheelchairs with a ground clearance 6″ or greater, please consider using The QLK 150 … More Info

Please verify all measurements (See “Wheelchair Measurement Guide” at top). NOTE: For wheelchairs with a ground clearance 6″ or greater, please consider using The QLK 150, with a Base Mount Kit of 2.5″ or more

Please verify all measurements (See “Wheelchair Measurement Guide” at top). Standard Tubing is 7/8″ NOTE:  For wheelchairs with a ground clearance 6″ or greater, please consider using The QLK 150 with a Base Mount Kit of 2.5″ or more

Please verify all measurements (See “Wheelchair Measurement Guide” at top). Standard Tubing is 7/8″

Please verify all measurements (See “Wheelchair Measurement Guide” at top). Standard Tubing is 1″ and Frame Rail +6″NOTE: For wheelchairs with a ground clearance 6″ or greater, please consider using The QLK 150, with a Base Mount Kit of 2.5″ … More Info

Please verify all measurements (See “Wheelchair Measurement Guide” at top). Standard Tubing is 1″ and Frame Rail +6″NOTE: For wheelchairs with a ground clearance 6″ or greater, please consider using The QLK 150, with a Base Mount Kit of 2.5″ … More Info