This bracket utilizes new technology which eliminates the traditional 5/8″ docking bolt. Please contact your sales representative for more information. Q’Straint recommends this bracket be used for the driver and front passenger positions in most vehicles. This bracket is also … More Info

Q’Straint recommends this bracket be used only for second row passenger positions, when entering the vehicle from a side ramp. NOT to be used for driver and front passenger positions, or when entering vehicle from the rear ramp/lift. See Q04BR143 … More Info

**NARROWFRM option on order form**

Narrow base 22.4″ (uses 2 M50 Batteries)

Please verify all measurements (See “Wheelchair Measurement Guide” at top). Standard Tubing is 1″ and Frame Rail +6″ NOTE:  For wheelchairs with a ground clearance 6″ or greater, please consider using The QLK 150 with a Base Mount Kit of … More Info

Please verify all measurements (See “Wheelchair Measurement Guide” at top).

Please verify all measurements (See “Wheelchair Measurement Guide” at top). Chair may have Bi-level frame – Center Strap of bracket may need to be bent. NOTE:  For wheelchairs with a ground clearance 6″ or greater, please consider using The QLK … More Info

Please verify all measurements (See “Wheelchair Measurement Guide” at top). Chair may have Bi-level frame – Center Strap of bracket may need to be bent.

Low Seat Back Option not approved: Also cross tube is not horizontal

Please verify all measurements (See “Wheelchair Measurement Guide” at top). Standard Tubing is 1″ and Frame Rail +6″ NOTE:  For wheelchairs with a ground clearance 6″ or greater, please consider using The QLK 150 with a Base Mount Kit of … More Info

Please verify all measurements (See “Wheelchair Measurement Guide” at top). Standard Tubing is 1″ NOTE:  For wheelchairs with a ground clearance 6″ or greater, please consider using The QLK 150 with a Base Mount Kit of 2.5″ or more

Please verify all measurements (See “Wheelchair Measurement Guide” at top). Standard Tubing is 1″

Please verify all measurements (See “Wheelchair Measurement Guide” at top). Standard Tubing is 1″ and Frame Rail +6″ NOTE:  For wheelchairs with a ground clearance 6″ or greater, please consider using The QLK 150 with a Base Mount Kit of … More Info

Please verify all measurements (See “Wheelchair Measurement Guide” at top). Installing bracket will keep the chair rigid and no longer allow it to fold. NOTE:  For wheelchairs with a ground clearance 6″ or greater, please consider using The QLK 150 … More Info

Please verify all measurements (See “Wheelchair Measurement Guide” at top). Standard Tubing is 1″ NOTE:  For wheelchairs with a ground clearance 6″ or greater, please consider using The QLK 150 with a Base Mount Kit of 2.5″ or more

Please verify all measurements (See “Wheelchair Measurement Guide” at top). Standard Tubing is 1″

Please verify all measurements (See “Wheelchair Measurement Guide” at top). Standard Tubing is 1″ and Frame Rail +6″ NOTE:  For wheelchairs with a ground clearance 6″ or greater, please consider using The QLK 150 with a Base Mount Kit of … More Info

Please verify all measurements (See “Wheelchair Measurement Guide” at top). Standard Tubing is 1″ NOTE:  For wheelchairs with a ground clearance 6″ or greater, please consider using The QLK 150 with a Base Mount Kit of 2.5″ or more

Please verify all measurements (See “Wheelchair Measurement Guide” at top). Standard Tubing is 1″

Please verify all measurements (See “Wheelchair Measurement Guide” at top). Standard Tubing is 1″ and Frame Rail +6″ NOTE:  For wheelchairs with a ground clearance 6″ or greater, please consider using The QLK 150 with a Base Mount Kit of … More Info

Please verify all measurements (See “Wheelchair Measurement Guide” at top). Standard Tubing is 1″ and Frame Rail +6″ NOTE:  For wheelchairs with a ground clearance 6″ or greater, please consider using The QLK 150 with a Base Mount Kit of … More Info

Please verify all measurements (See “Wheelchair Measurement Guide” at top). Installing bracket will keep the chair rigid and no longer allow it to fold. Bracket will add up to 15 lbs. of extra weight to chair. NOTE:  For wheelchairs with … More Info

This Kit features our QLK-150 Advanced Stabilizer.

The Storm series has oval shaped frame tubing

(NOT THE STORM SERIES) Measure frame width, outside to outside (16″, 18″, 20″).

Low Ground Clearance – Some configurations may require the use of the QLK-150 with 1.5″ Base Mounts (#QS99020). Clearance under docking pin will be greater than 1″.

Must specify foot rest option, if single footboard some adjustment will be lost.

Must specify foot rest option, if single footboard some adjustment will be lost.

Must specify foot rest option, if single footboard some adjustment will be lost.

Must specify foot rest option, if single footboard some adjustment will be lost.

Must specify foot rest option, if single footboard some adjustment will be lost.

Low Ground Clearance – Must use QLK-150 with 1.5″ Base Mounts (#QS99020). Clearance under docking pin will be greater than 1″. This Kit features our QLK-150 Advanced Stabilizer. Forward entry recommended

Wheelchair has 1″ diameter tubing; frame-rail is above 6″ from the floor.

Please verify all measurements (See “Wheelchair Measurement Guide” at top). Standard Tubing is 1″ and Frame Rail +6″ NOTE:  For wheelchairs with a ground clearance 6″ or greater, please consider using The QLK 150 with a Base Mount Kit of … More Info

Includes Stabl-VT front stabilizer

Please verify all measurements (See “Wheelchair Measurement Guide” at top).NOTE: For wheelchairs with a ground clearance 6″ or greater, please consider using The QLK 150, with a Base Mount Kit of 2.5″ or more

Please verify all measurements (See “Wheelchair Measurement Guide” at top).

Please verify all measurements (See “Wheelchair Measurement Guide” at top).NOTE: For wheelchairs with a ground clearance 6″ or greater, please consider using The QLK 150, with a Base Mount Kit of 2.5″ or more

Please verify all measurements (See “Wheelchair Measurement Guide” at top).

Please verify all measurements (See “Wheelchair Measurement Guide” at top).

Please verify all measurements (See “Wheelchair Measurement Guide” at top).NOTE: For wheelchairs with a ground clearance 6″ or greater, please consider using The QLK 150, with a Base Mount Kit of 2.5″ or more

Wheelchair has 1″ diameter tubing; frame-rail is less than 6″ the from the floor.

Front wheel drive, Arrow Storm series power wheelchair

RWD and MWD. NOTE: Bracket installs onto dual rear suspension frames, therefore wIll still allow rear suspension but will not allow frame pieces to act independently. NOTE: For Models with Motion Concepts Seating systems please use Q04BR060 if the actuator … More Info

RWD and MWD. NOTE: Bracket installs onto dual rear suspension frames, therefore wIll still allow rear suspension but will not allow frame pieces to act independently. NOTE: For Models with Motion Concepts Seating systems please use Q04BR060 if the actuator … More Info

RWD and MWD. NOTE: Bracket installs onto dual rear suspension frames, therefore wIll still allow rear suspension but will not allow frame pieces to act independently. NOTE: For Models with Motion Concepts Seating systems please use Q04BR060 if the actuator is … More Info

RWD and MWD. NOTE: Bracket installs onto dual rear suspension frames, therefore wIll still allow rear suspension but will not allow frame pieces to act independently. NOTE: For Models with Motion Concepts Seating systems please use Q04BR060 if the actuator is … More Info

RWD and MWD. NOTE: Bracket installs onto dual rear suspension frames, therefore wIll still allow rear suspension but will not allow frame pieces to act independently. NOTE: For Models with Motion Concepts Seating systems please use Q04BR060 if the actuator is … More Info

RWD and MWD. NOTE: Bracket installs onto dual rear suspension frames, therefore wIll still allow rear suspension but will not allow frame pieces to act independently. NOTE: For Models with Motion Concepts Seating systems please use Q04BR060 if the actuator is … More Info

Rear wheel and mid wheel drive. Model number starts with 2G and the wheelchair has gearless brushless motors. See bottom of this page for details.

RWD and MWD. NOTE: Bracket installs onto dual rear suspension frames, therefore wIll still allow rear suspension but will not allow frame pieces to act independently. NOTE: For Models with Motion Concepts Seating systems please use Q04BR060 if the actuator is … More Info

RWD and MWD. NOTE: Bracket installs onto dual rear suspension frames, therefore wIll still allow rear suspension but will not allow frame pieces to act independently. NOTE: For Models with Motion Concepts Seating systems please use Q04BR060 if the actuator is … More Info

RWD and MWD. NOTE: Bracket installs onto dual rear suspension frames, therefore wIll still allow rear suspension but will not allow frame pieces to act independently.NOTE: For Models with Motion Concepts Seating systems please use Q04BR060 if the actuator is inside … More Info

RWD and MWD. NOTE: Bracket installs onto dual rear suspension frames, therefore wIll still allow rear suspension but will not allow frame pieces to act independently. NOTE: For Models with Motion Concepts Seating systems please use Q04BR060 if the actuator … More Info

RWD and MWD. NOTE: Bracket installs onto dual rear suspension frames, therefore wIll still allow rear suspension but will not allow frame pieces to act independently. NOTE: For Models with Motion Concepts Seating systems please use Q04BR060 if the actuator … More Info

(Forward Entry Only) TRE Seating system (Tilt Recline Elevate) NOTE: For Models with Motion Concepts Seating systems please use Q04BR060 if the actuator is inside the battery tray. 

(Forward Entry Only)NOTE: Bracket Q04BR068 is only used with models that have “Formula Invisible Super Low Tilt Seating Systems”. For Models with Motion Concepts Seating systems please use Q04BR060 if the actuator is inside the battery tray.

(Forward Entry Only)NOTE: For Models with Motion Concepts Seating systems please use Q04BR060 if the actuator is inside the battery tray. 

(Forward Entry Only) TRE Seating system (Tilt Recline Elevate) NOTE: For Models with Motion Concepts Seating systems please use Q04BR060 if the actuator is inside the battery tray. 

Group 22 Battery Tray width is 9-7/8″. Works with or without elevating seat systems. For driving applications, the front battery door will have to be modified to allow the bracket stabilizer to pass through.

Group 24 Battery Tray width is 11-9/32″  Works with or without elevating seat systems. For driving applications, the front battery door will have to be slotted to allow the bracket stabilizer to pass through.

TDX SP with Invacare Formula elevating seating option -requires battery door bracket modification