FIND YOUR CHAIR: FIND YOUR BRACKET.

Your selections:


Showing 1–80 of 652 results

  • ANY RIGID SPORT-FRAME WHEELCHAIR / Lightweight Bracket

    TiLite Rigid ZRA

    Introducing the new lightweight rigid sport chair bracket. This bracket is 50% lighter than our traditional sports chair bracket application. NOTE: Wheelchair must have camber tube and seat cross tube. Seat cross tube diameter must be between 0.7″ to 1.125″. … More Info

    BRACKET: Q04BR133

  • ANY RIGID SPORT-FRAME WHEELCHAIR / Lightweight Bracket

    TiLite Rigid ZRA

    Introducing the new lightweight rigid sport chair bracket. This bracket is 50% lighter than our traditional sports chair bracket application. NOTE: Wheelchair must have camber tube and seat cross tube. Seat cross tube diameter must be between 0.7″ to 1.125″. … More Info

    BRACKET: Q04BR135

  • Avid Rehab Vector

    Merits Vector P323

    Chair has threaded mounting hole for 5/8″ docking bolt from factory. This part is a Drivers Kit, which is comprised of the docking bolt, advanced stabilizer, and stabilizer hardware to be used with the QLK-150.

    BRACKET: Q04BR121

  • Avid Rehab Vector HD

    Merits Vector P323

    Chair has threaded mounting hole for 5/8″ docking bolt from factory. This part is a Drivers Kit, which is comprised of the docking bolt, advanced stabilizer, and stabilizer hardware to be used with the QLK-150.

    BRACKET: Q04BR121

  • Avid Rehab Velocity

    Merits Velocity P325

    Chair has threaded mounting hole for 5/8″ docking bolt from factory. This part is a Drivers Kit, which is comprised of the docking bolt, advanced stabilizer, and stabilizer hardware to be used with the QLK-150.

    BRACKET: Q04BR120

  • Invacare Storm Aviva FX

    This bracket utilizes new technology which eliminates the traditional 5/8″ docking bolt. Please contact your sales representative for more information. Q’Straint recommends this bracket be used for the driver and front passenger positions in most vehicles. This bracket is also … More Info

    BRACKET: Q04BR143

  • Invacare Storm Aviva FX

    Q’Straint recommends this bracket be used only for second row passenger positions, when entering the vehicle from a side ramp. NOT to be used for driver and front passenger positions, or when entering vehicle from the rear ramp/lift. See Q04BR143 … More Info

    BRACKET: Q04BR147

  • Invacare Storm Aviva RX

    BRACKET: Non-Approved

  • Merits Vision Ultra P325

    Merits Vision Ultra P325

    Chair has threaded mounting hole for 5/8″ docking bolt from factory. This part is a Drivers Kit, which is comprised of the docking bolt, advanced stabilizer, and stabilizer hardware to be used with the QLK-150.

    BRACKET: Q04BR120

  • Motion Composites Apex A

    NOTE: Wheelchair must have camber tube and cross tube, and tube diameter must be between 0.875″ to 1.37″. Distance from cross tube to camber tube must be between 4.5″ to 11.25″ to use this bracket. If your chair has a … More Info

    BRACKET: Q04BR101

  • Motion Composites Apex A

    NOTE: Wheelchair must have camber tube and cross tube, and tube diameter must be between 0.875″ to 1.37″. Distance from cross tube to camber tube must be between 4.5″ to 11.25″ to use this bracket. If your chair has a … More Info

    BRACKET: Q04BR102

  • Motion Composites Apex A (Lightweight Bracket)

    Introducing the new lightweight rigid sport chair bracket. This bracket is 50% lighter than our traditional sports chair bracket application. NOTE: Wheelchair must have camber tube and seat cross tube. Seat cross tube diameter must be between 0.7″ to 1.125″. … More Info

    BRACKET: Q04BR133

  • Motion Composites Apex A (Lightweight Bracket)

    Introducing the new lightweight rigid sport chair bracket. This bracket is 50% lighter than our traditional sports chair bracket application. NOTE: Wheelchair must have camber tube and seat cross tube. Seat cross tube diameter must be between 0.7″ to 1.125″. … More Info

    BRACKET: Q04BR135

  • Motion Composites Apex C

    NOTE: Wheelchair must have camber tube and cross tube, and tube diameter must be between 0.875″ to 1.37″. Distance from cross tube to camber tube must be between 4.5″ to 11.25″ to use this bracket. If your chair has a … More Info

    BRACKET: Q04BR101

  • Motion Composites Apex C

    NOTE: Wheelchair must have camber tube and cross tube, and tube diameter must be between 0.875″ to 1.37″. Distance from cross tube to camber tube must be between 4.5″ to 11.25″ to use this bracket. If your chair has a … More Info

    BRACKET: Q04BR102

  • Motion Composites Apex C (Lightweight Bracket)

    Introducing the new lightweight rigid sport chair bracket. This bracket is 50% lighter than our traditional sports chair bracket application. NOTE: Wheelchair must have camber tube and seat cross tube. Seat cross tube diameter must be between 0.7″ to 1.125″. … More Info

    BRACKET: Q04BR133

  • Motion Composites Apex C (Lightweight Bracket)

    Introducing the new lightweight rigid sport chair bracket. This bracket is 50% lighter than our traditional sports chair bracket application. NOTE: Wheelchair must have camber tube and seat cross tube. Seat cross tube diameter must be between 0.7″ to 1.125″. … More Info

    BRACKET: Q04BR135

  • Motion Composites Helio A6

    Please verify all measurements (See “Wheelchair Measurement Guide” at top). NOTE:  For wheelchairs with a ground clearance 6″ or greater, please consider using The QLK 150 with a Base Mount Kit of 2.5″ or more.

    BRACKET: Q04BR001

  • Motion Composites Helio A7

    Please verify all measurements (See “Wheelchair Measurement Guide” at top). NOTE:  For wheelchairs with a ground clearance 6″ or greater, please consider using The QLK 150 with a Base Mount Kit of 2.5″ or more.

    BRACKET: Q04BR001

  • Motion Composites Helio C2

    Please verify all measurements (See “Wheelchair Measurement Guide” at top). NOTE:  For wheelchairs with a ground clearance 6″ or greater, please consider using The QLK 150 with a Base Mount Kit of 2.5″ or more.

    BRACKET: Q04BR001

  • Motion Composites Veloce

    Please verify all measurements (See “Wheelchair Measurement Guide” at top). NOTE:  For wheelchairs with a ground clearance 6″ or greater, please consider using The QLK 150 with a Base Mount Kit of 2.5″ or more.

    BRACKET: Q04BR001

  • Pride Mobility Jazzy Air 2

    Pride Mobility Jazzy Air 2

    The Jazzy Air Wheelchair Bracket is ONLY for Forward Entry Applications. Suspension adjustment may be necessary to clear certain thresholds and higher incline ramps.

    BRACKET: Q04BR104

  • Pride Mobility Jazzy EVO 613

    The Jazzy Evo 613 Wheelchair Bracket is ONLY for Forward Entry Applications. Suspension adjustment may be necessary to clear certain thresholds and higher incline ramps.

    BRACKET: Q04BR104

  • Pride Mobility Jazzy EVO 613 Li

    The Jazzy Evo 613 Wheelchair Bracket is ONLY for Forward Entry Applications. Suspension adjustment may be necessary to clear certain thresholds and higher incline ramps.

    BRACKET: Q04BR104

  • Pride Mobility Jazzy EVO 614/Jazzy EVO 614 HD

    Please call customer service for more information. Bracket is currently only available for “non EVO” models of the 614.

    BRACKET: Non-Approved

  • Pride Mobility Jazzy Select 6 2.0

    The Jazzy Select 6 2.0 Wheelchair Bracket is ONLY for Forward Entry Applications. Suspension adjustment may be necessary to clear certain thresholds and higher incline ramps.

    BRACKET: Q04BR104

  • Pride Mobility Quantum 4Front2

    NOTE: For additional ground clearance Q’straint strongly recommends using QLK-150 with optional 2.5″ base mount Kit (QS99022).

    BRACKET: Q04BR116

  • Pride Mobility Quantum 4Front2

    NOTE: For additional ground clearance Q’straint strongly recommends using QLK-150 with optional 2.5″ base mount Kit (QS99022).

    BRACKET: Q04BR117

  • Pride Mobility Quantum 4Front2 HD

    NOTE: For additional ground clearance Q’straint strongly recommends using QLK-150 with optional 2.5″ base mount Kit (QS99022).

    BRACKET: Q04BR116

  • Pride Mobility Quantum 4Front2 HD

    NOTE: For additional ground clearance Q’straint strongly recommends using QLK-150 with optional 2.5″ base mount Kit (QS99022).

    BRACKET: Q04BR117

  • Quantum Rehab R-TRAK

    Coming Soon! We are in the process of developing a solution for this application. Stay tuned for updates! For inquiries or assistance, please don’t hesitate to Contact Us. Thank you for your anticipation and support. Best regards, Customer Support Team

    BRACKET: Coming Soon!

  • Sunrise Medical Quickie 500 H

    BRACKET: Q04BR082

  • Sunrise Medical Quickie Q300 M Mini

    This bracket utilizes new technology which eliminates the traditional 5/8″ docking bolt. Please contact your sales representative for more information. Q’Straint recommends this bracket be used for the driver and front passenger positions in most vehicles. This bracket is also … More Info

    BRACKET: Q04BR138

  • Pride Mobility Quantum 4Front

    Pride Mobility Quantum 4Front

    NOTE: For additional ground clearance Q’straint strongly recommends using QLK-150 with optional 2.5″ base mount Kit (QS99022).

    BRACKET: Q04BR116

  • Pride Mobility Quantum Q6 Edge

    Pride Mobility Quantum Q6 Edge

    May use power elevating seat

    BRACKET: Q04BR060

  • Whill Inc. Model M

    Whill Inc. Model M

    Q’Straint recommends this bracket be used for Second Row Passenger positions in most vehicles. Q04BR108 is recommended for Driver and Front Passenger Positions.

    BRACKET: Q04BR103

  • Whill Inc. Model A

    Whill Inc. Model A

    Q’Straint recommends this bracket be used for the Driver and Front Passenger positions in most vehicles. Q04BR103 is recommended for Second Row Passenger applications.

    BRACKET: Q04BR108

  • Permobil M Series M VS

    May include Corpus VS which stands for Corpus Vertical Standing Seating System and does not affect our bracket installation. Seating system should be in fully lowered position while using docking system. Q’Straint recommends this bracket be used only for second … More Info

    BRACKET: Q04BR125

  • Permobil M Series M5

    Permobil M Series M5

    May include Corpus which stands for Corpus Seating System and does not affect our bracket installation. Q’Straint recommends this bracket be used only for second row passenger positions, when entering the vehicle from a side ramp. NOT to be used … More Info

    BRACKET: Q04BR125

  • Quantum Rehab Edge 3 Stretto

    Q’Straint recommends this bracket be used only for second row passenger positions, when entering the vehicle from a side ramp. NOT to be used for driver and front passenger positions, or when entering vehicle from the rear ramp/lift. See Q04BR129 … More Info

    BRACKET: Q04BR130

  • Permobil F Series F3

    Permobil F Series F3

    May include Corpus which stands for Corpus Seating System and does not affect our bracket installation. Q’Straint recommends this bracket be used for the driver and front passenger positions in most vehicles. This bracket is also used for second row … More Info

    BRACKET: Q04BR123

  • Permobil F Series F3

    Permobil F Series F3

    May include Corpus which stands for Corpus Seating System and does not affect our bracket installation. Q’Straint recommends this bracket be used only for second row passenger positions, when entering the vehicle from a side ramp. NOT to be used … More Info

    BRACKET: Q04BR122

  • Quantum Rehab Edge 3 Stretto

    Q’Straint recommends this bracket be used for the Driver and Front Passenger positions in most vehicles. Q04BR130 is recommended for Second Row Passenger applications. Note: This bracket comes with an integrated stabilizer. *** For back in applications (ex: ATC Conversion), … More Info

    BRACKET: Q04BR129

  • Orthofab Oasis G2

    Orthofab Oasis G2

    Model discontinued by manufacturer.

    BRACKET: Q04BR114

  • Any Rigid Sport-frame Wheelchair

    Any Rigid Sport-frame Wheelchair

    NOTE: Wheelchair must have camber tube and cross tube, and tube diameter must be between 0.875″ to 1.37″. Distance from cross tube to camber tube must be between 4.5″ to 11.25″ to use this bracket. If your chair has a … More Info

    BRACKET: Q04BR102

  • Any Manual Wheelchair

    Any Manual Wheelchair

    Please verify all measurements (See “Wheelchair Measurement Guide” at top). NOTE:  For wheelchairs with a ground clearance 6″ or greater, please consider using The QLK 150 with a Base Mount Kit of 2.5″ or more

    BRACKET: Q04BR006

  • Amylior (Amy Systems) Alltrack M/ M3/ M3 HD

    FS2221B – Group 22 Batteries (22” Wide base, Battery tray 6”)

    BRACKET: Bracket in development, please call 1-800-986-9986 for more information.

  • Amylior (Amy Systems) Alltrack M/ M3/ M3 HD

    FS2424B – Group 24 batteries (24” Wide Base – Battery Tray 8.95”)

    BRACKET: Q04BR090

  • Amylior (Amy Systems) Alltrack R / R3 / R3 HD

    Amylior (Amysystems) Alltrack R3 FS22B – Group 22 Batteries (23 3/8” Wide Base – Battery tray 9.65”)

    BRACKET: Q04BR081

  • Amylior (Amy Systems) Alltrack P / P3

    Alltrack P3 HWD FS22B – Group 22 Batteries (23 3/8” Wide Base – Battery tray 9.65”)

    BRACKET: Q04BR081

  • Amylior (Amy Systems) Alltrack P / P3

    Alltrack P3 MWD FS2424B – Group 24 batteries (24” Wide Base – Battery Tray 8.95′)

    BRACKET: Q04BR090

  • Amylior (Amy Systems) Alltrack P / P3

    Alltrack P3 (MWD) FS2221B – Group 22 Batteries (22” Wide base, Battery tray 6”)

    BRACKET: Bracket in development, please call 1-800-986-9986 for more information.

  • Amylior (Amy Systems) Alltrack P / P3

    Alltrack P3 (MWD) FS22B – Group 22 Batteries (23 3/8” Wide Base – Battery tray 9.65”)

    BRACKET: Q04BR077

  • Amylior (Amy Systems) Alltrack R / R3 / R3 HD

    Amylior (Amysystems) Alltrack R3 FS24B – Group 24 Batteries (25 3/8” Wide Base – Battery Tray 10.90” )

    Amylior (Amysystems) Alltrack R3 HD FS24B – Group 24 Batteries (25 3/8” Wide Base – Battery Tray 10.90”)

    BRACKET: Q04BR080

  • Amylior (Amy Systems) Quickie 323

    Quickie 323 – Group 22 batteries (23 3/8 Wide base – Battery tray 9.65”)

    BRACKET: Q04BR077

  • Amylior (Amy Systems) Quickie 747

    Quickie 747 – Group 24 batteries (25 3/8” Wide base – Battery Tray 10.90”)

    BRACKET: Q04BR080

  • Amylior (Amy Systems) Quickie 323

    Quickie 323 – Group 24 batteries (25 3/8 base – Battery Tray 10.90”)

    BRACKET: Q04BR078

  • Amylior (Amy Systems) Quickie 747

    Quickie 747 – Group 22 batteries (Battery tray 9.65”)

    BRACKET: Q04BR081

  • Amylior (Amy Systems) Quickie Xperience2

    Quickie Xperience2 – Group 24 batteries (25 3/8 base – Battery Tray 10.90”)

    BRACKET: Q04BR078

  • Amylior (Amy Systems) Quickie Xperience2

    Quickie Xperience2 – Group 22 batteries – Battery tray 9.65”

    BRACKET: Q04BR077

  • Amylior (Amy Systems) Quickie Xplore2

    Quickie Xplore2 – Group 24 batteries (Battery Tray 10.90”)

    BRACKET: Q04BR080

  • Amylior (Amy Systems) Quickie Xplore2

    Quickie Xplore2 – Group 22 batteries (Battery tray 9.65”)

    BRACKET: Q04BR081

  • Amylior (Amy Systems) Alltrack M / M3 /M3 HD

    FS22B – Group 22 Batteries (23 3/8″ Wide Base – Battery Tray 9.65″)

    BRACKET: Q04BR077

  • Amylior (Amy Systems) Alltrack M / M3 / M3 HD

    FS24B – Group 24 Batteries (25 3/8″ Wide Base – Battery Tray 10.90″)

    BRACKET: Q04BR078

  • Any Manual Wheelchair

    Any Manual Wheelchair

    Please verify all measurements (See “Wheelchair Measurement Guide” at top). NOTE:  For wheelchairs with a ground clearance 6″ or greater, please consider using The QLK 150 with a Base Mount Kit of 2.5″ or more.

    BRACKET: Q04BR001

  • Any Manual Wheelchair

    Any Manual Wheelchair

    Please verify all measurements (See “Wheelchair Measurement Guide” at top). 

    BRACKET: Q04BR002

  • Any Manual Wheelchair

    Any Manual Wheelchair

    Please verify all measurements (See “Wheelchair Measurement Guide” at top). 

    BRACKET: Q04BR003

  • Any Manual Wheelchair

    Any Manual Wheelchair

    Please verify all measurements (See “Wheelchair Measurement Guide” at top).            NOTE:  For wheelchairs with a ground clearance 6″ or greater, please consider using The QLK 150 with a Base Mount Kit of 2.5″ or more.

    BRACKET: Q04BR004

  • Any Manual Wheelchair

    Any Manual Wheelchair

    Please verify all measurements (See “Wheelchair Measurement Guide” at top).NOTE: For wheelchairs with a ground clearance 6″ or greater, please consider using The QLK 150, with a Base Mount Kit of 2.5″ or more

    BRACKET: Q04BR027

  • Any Rigid Sport-frame Wheelchair

    Any Rigid Sport-frame Wheelchair

    NOTE: Wheelchair must have camber tube and cross tube, and tube diameter must be between 0.875″ to 1.37″. Distance from cross tube to camber tube must be between 4.5″ to 11.25″ to use this bracket. If your chair has a … More Info

    BRACKET: Q04BR101

  • Bantex

    Bantex

    Please verify all measurements (See “Wheelchair Measurement Guide” at top). Standard Tubing is 7/8″ NOTE:  For wheelchairs with a ground clearance 6″ or greater, please consider using The QLK 150 with a Base Mount Kit of 2.5″ or more

    BRACKET: Q04BR004

  • Bantex

    Bantex

    Please verify all measurements (See “Wheelchair Measurement Guide” at top). Standard Tubing is 7/8″

    BRACKET: Q04BR002

  • Broda 550 Tilt Recliner

    Broda 550 Tilt Recliner

    Can only be used with Broda WC-19 compliant Vehicle Transport Package Option.

    BRACKET: Q04BR001

  • Broda 785 Tilt Recliner

    Broda 785 Tilt Recliner

    Can only be used with Broda WC-19 compliant Vehicle Transport Package Option.

    BRACKET: Q04BR001

  • Bruno PWC PWC-2200

    Bruno PWC PWC-2200

    Will not fit power seat post, PWC-23106

    BRACKET: Non-Approved

  • Bruno PWC PWC-2300

    Bruno PWC PWC-2300

    Will not fit power seat post, PWC-23106

    BRACKET: Non-Approved

  • Colours Acti-Fold

    Colours Acti-Fold

    Please verify all measurements (See “Wheelchair Measurement Guide” at top). Installing bracket will keep the chair rigid and no longer allow it to fold. NOTE:  For wheelchairs with a ground clearance 6″ or greater, please consider using The QLK 150 … More Info

    BRACKET: Q04BR001

  • Colours Eclipse

    Colours Eclipse

    Please verify all measurements (See “Wheelchair Measurement Guide” at top). NOTE: For wheelchairs with a ground clearance 6″ or greater, please consider using The QLK 150, with a Base Mount Kit of 2.5″ or more

    BRACKET: Q04BR001

  • Comfort Orthopedic

    Comfort Orthopedic

    Please verify all measurements (See “Wheelchair Measurement Guide” at top). Standard Tubing is 7/8″ NOTE:  For wheelchairs with a ground clearance 6″ or greater, please consider using The QLK 150 with a Base Mount Kit of 2.5″ or more

    BRACKET: Q04BR004

  • Comfort Orthopedic

    Comfort Orthopedic

    Please verify all measurements (See “Wheelchair Measurement Guide” at top). Standard Tubing is 7/8″

    BRACKET: Q04BR002